HP CD-ROM Server User's Guide

Security Management 6-1
6
Security Management
How to Setup Access Restrictions
1.
Read the general information given in “HP CD-ROM Server
Access Rights” later in this chapter.
2.
Choose the method you will use to set the security parameters
held in the CD-ROM server’s access files:
•
Web Browser
. . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-3
This is the easiest way and is supported by on-line help
instructions. However,this method requires that the
CD-ROM server be configured with an Internet (IP)
address for TCP/IP networks.
•
Text Editor
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-6
This method can be used from any environment through
your favorite text editor.
Note
❏
For Windows 95 and NT 4.0 systems, you can also configure
the HP CD-ROM Server using a software utility available
from HP’s Web site. Refer to the Electronic Services at the
front of this guide for more information).
3.
Refer to the appropriate section in this chapter for information
on setting access restrictions for your particular network
environment:
•
NetWare 3.x
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-9
(Includes access restrictions in NetWare Bindery with,
and without, authentication against the 3.x server.)
•
NetWare 4.x
. . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-11
This covers access restrictions in NetWare NDS.
•
Microsoft and IBM Networks
. . . . . . . . . . . . page 6-12
•
UNIX (NFS)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-13
(Includes authentication of PCs in NFS environments.)
hp.book Page 1 Thursday, April 2, 1998 4:33 PM