HP CD-ROM Server User's Guide

Security Management 6-5
5. Click the Management and Access Rights tab. When entering
for the first time during a session you will be prompted to enter
the Username (default is root) and Password (default is
pass). The page below will be displayed.
If you need help, click the ? button to display the on-line help.
6. Management is grouped into four areas: General, CD-ROM
Rights, Drive Rights, and Server Rights. Click the Server
Rights tab for volume rights.
The following notes may help you when managing access rights:
• The identity of the drive will appear as: id<x>lun<y>
where <x> is the SCSI address and <y> the LUN
address.
• If the disc has no volume name, and an alias name has
not been assigned, the name of the disc will default to
cd_nnnnn, where nnnnn is an unique five digit number.
• The settings for a CD-ROM are stored even if the disc is
removed. The settings are immediately available if the
disc is re-inserted. Settings for typically 56 CD-ROMs
can be stored in the CD-ROM server at any time. If the
limit is reached, the oldest setting is discarded when a
new CD-ROM is inserted.
• The access settings for a CD-ROM drive will override the
CD-ROM disc settings for discs that are inserted in that
drive. But this only occurs when an alias name is entered
for the drive - if there is no alias, the drive access settings
are not used.
hp.book Page 5 Thursday, April 2, 1998 4:33 PM