HP CD-ROM Server User's Guide

B-2 The Config.ini File
BOOTPEnable = yes Enable or disable bootp IP address setup.
RARPEnable = yes Enable or disable rarp IP address setup.
DHCPEnable = no Enable or disable dhcp IP address setup.
[SMB]
EnableNetBEUI = yes Enable or disable SMB over NetBIOS/NetBEUI.
EnableNBT = yes Enable or disable SMB over NetBIOS/TCP/IP.
EnableWINS = yes Enable or disable WINS over NetBIOS/TCP/IP.
PrimaryWINSserver = Primary WINS server address.
SecondaryWINSserver = Secondary WINS server address, if required.
NBTscopeID = Always Enabled. Default: Empty String.
Domain/GroupName = WORKGROUP The name of the CD-ROM server workgroup.
ServerName = HPhhhhh
The server name in the Microsoft Network
environment, where hhhhh are the last 6 digits of the
LAN hardware address.
NetBEUIFrameType = auto
If auto is selected 802.2 or DIX will automatically be
selected by scanning the network. If required, the
frame type can also be set to either 802_2 or DIX.
ShowPseudoShares = yes
Enable or disable whether the cd, config, root, and
volumes folders are visible.
[NFS]
NFSEnable = yes Enable or disable NFS.
DefaultUid = -2
Default user id to be used when authenticating
PCNFSD clients. Disable by setting the parameter
to 0 (zero).
PCNFSDAuthentServer = 0.0.0.0
The Internet address of the server used for
authentication of the PC users on the UNIX (NFS)
network. Disable by setting the parameter to 0.0.0.0.
[HTTP/FTP]
Password = pass
Password used when using HTTP or FTP to access
the server.
HTTPEnable = yes
Enable or disable HTTP. Disabling the HTTP
protocol is also a way of restricting users from
accessing the CD-ROMs from Web browsers.
BaseURL = www.hp.com/ Used for external links.
[SNMP]
GetCommunityName = public
Specifies the community that has read only access
to all supported SNMP objects except
writeCommunity, SupervisorPassword and
ftpPassword. It corresponds to the readCommunity
SNMP object.
Parameter name Default Value Description
hp.book Page 2 Thursday, April 2, 1998 4:33 PM