HP SureStore AutoBackup Administrator's Guide - Not Orderable

Connectivity: 10/100 base-T auto-sensing LAN Connector (RJ45)
Wide Ultra SCSI-3 interface (for HP SureStore Tape
backup device)
Requires TCP/IP network protocol
Network
Compatible Network
Operating System:
TCP/IP network protocol. Requires Windows NT 4.0
Workstation, Windows 95/98 or Windows 2000 clients
Administrator's PC (Minimum
Specification)
This is the minimum specification for the PC that is used to run the Installation
program and administer the appliance.
Operating System
Windows 95 PCs
(Version A or later):
Intel, or compatible, 486DX2-66 MHz with 16 MB
RAM
Windows 98 PCs (Second
Edition or original
release):
Intel, or compatible, 486DX2-66 MHz with 24 MB
RAM
Windows NT Workstations
(with Service Pack 4 or
later):
Intel, or compatible, Pentium 90 MHz with 32 MB
RAM
Windows 2000
Professional:
Intel, or compatible, Pentium 90 MHz with 32 MB
RAM
FAT16, FAT32 and NTFS file systems are supported. NTFS encryption (available
in Windows 2000) is NOT supported
Disk Space Required
Typical software
installation:
10 MB
Other Requirements
disk drive: 3.5" high density floppy disk drive
Network:
Network connection running TCP/IP protocol
Unique computer name for each client Network
Connection - Initial backup requires 10 Mbit
connection. Full backups require at least 28Kbit
connection
Monitor: VGA or higher resolution (800 x 600)
Browser Software: Internet Explorer v4 or higher only (not Netscape
Navigator)
Specifications
file:///D|/ADMIN_~1/eng/admin/spec.htm (2 of 4) [5/3/2000 3:32:01 PM]