HP SureStore AutoBackup Administrator's Guide - Not Orderable

HP SureStore DAT40x6 and Language Selection
Eject Button
Front Panel Display
The LCD display shows status information about the autoloader in each of its five
regions. Note that this exact display can never occur; all sections are showing at the
same time so that you can see where they are.
The ten-character dot matrix display provides information on the autoloader's
operating status and potential error conditions. See Front Panel Messages for
details of messages that can be displayed here.
1.
The large numeral shows the number of the cartridge currently loaded in the
drive or the cartridge that you have selected by pressing the Select button
repeatedly.
2.
"DC" is displayed when data compression is being used for writing. "WP" is
displayed when the cartridge is write-protected.
3.
The six numbered boxes on the right of the display are individually lit to show
which magazine slots contain cartridges.
4.
The display at the bottom of the display shows how much tape has been used
in the current partition. The more lines shown, the more tape has been used.
When all the lines show, the partition is full.
5.
Magazine Present Light (top)
Front Panel Lights, Autoloader
file:///D|/ADMIN_~1/eng/tape/lights_a.htm (2 of 17) [5/3/2000 3:33:42 PM]