HP SureStore AutoBackup Administrator's Guide - Not Orderable

To reset the appliance
Click the Power button four times within two seconds.1.
A prompt will appear on the LCD asking if to confirm the reset.2.
Click the Power button four times within two seconds again to confirm the
emergency reset.
3.
Run install.exe from the AutoBackup installation CD-ROM to
reconfigure the network settings and the administrator's password.
4.
BIOS Fail-Safe
If the software running on the HP SureStore AutoBackup appliance fails for some
reason, the BIOS will detect the failure automatically and rebuild the software
without any user intervention. After the software rebuild, it returns the appliance to a
fully working state without any loss of the backup data stored on the appliance or the
configure settings. See Software Failures for further details.
Optional Tape Drive
The optional connection to an HP SureStore tape drive provides the facility to back
up the appliance so that data can be stored offsite and restored should an appliance
disaster occur, such as fire, flood, earthquake, theft or disk hardware failure. See
Managing Tape Backup and Restore for further details.
Appliance Managment
file:///D|/ADMIN_~1/eng/admin/applianc.htm (4 of 4) [5/3/2000 3:32:03 PM]