HP SureStore AutoBackup Administrator's Guide - Not Orderable

Lost User Settings Web:
YES Critical
LCD: YES
Status Light:
Flashing
YELLOW
While performing a repair or
update of the system software, an
error occurred while attempting to
restore the original protected
computer configuration settings.
The users on the protected
computers will be automatically
prompted to re-register with the
HP SureStore AutoBackup system.
The re-registration will
automatically link the protected
computer back to its backup
account without having to reinstall
the AutoBackup Agent.
User-initiated via detailed
message page
Software update failure Web:
YES Critical
LCD: NO
Status Light:
GREEN
The software update installation
failed. To try the installation again,
click the following hyperlink.
User-initiated via detailed
message page
Installation of the
software update
succeeded
Web:
YES Info
LCD: NO
Status Light:
GREEN
The software update installation
succeeded and your HP SureStore
AutoBackup system is now using
the new software.
User-initiated via detailed
message page
Repeat button sequence
to confirm reset
Web:
YES Critical
LCD: YES
Status Light:
Flashing
YELLOW
The user has pressed the power
button four times within two
seconds, which initiates an
emergency reset sequence. If they
repeat the sequence within 10
seconds then network and admin
settings cleared
After 10 seconds
Backup Service Status
Backup Service Failure
Retention Job Failed*
Integrity Check Failed*
The Users Accounts are removed
Troubleshooting, Alert Messages
file:///D|/ADMIN_~1/eng/trouble/alerts.htm (11 of 23) [5/3/2000 3:34:44 PM]