HP SureStore AutoBackup Administrator's Guide - Not Orderable

There are a number of possible detail messages for summary messages marked
'*', the link takes you to the first one.
Alert Summary
Message
Alerts (Web,
LCD and
Status
Light)
Alert Details Message Clearing Criteria
Backup Service Failure Web:
YES Critical
LCD: YES
Status Light:
Flashing
YELLOW
Your HP SureStore AutoBackup
system was unable to initialize
correctly, so no backup or restore
jobs can be run by any of your
protected computers. This is likely
to be due to a data corruption in
the backup data.
To repair a data corruption of the
backup data, you can either
manually reset the system
software with the option set to
delete the data (using the
Advanced Administration
option), or you can perform an
appliance recovery from tape if
you have a tape backup of your
HP SureStore AutoBackup
system.
Appliance initializes
correctly
Retention Job Failed Web:
YES Critical
LCD: YES
Status Light:
Flashing
YELLOW
An internal error occurred during
the retention job. Some parts of
program code may be missed or
corrupted. To repair a corruption
of the system software you can
manually reset the system
software using the Advanced
Administration options
User-initiated via detailed
message page
Retention Job Failed Web:
YES Critical
LCD: YES
Status Light:
Flashing
YELLOW
An internal error occurred during
the retention job, and the backup
data on the AutoBackup system
was corrupted. To repair a data
corruption of the backup data, you
can either manually reset the
system software with the option
set to delete the data (using the
Advanced Administration
options), or you can perform an
recovery from tape if you have a
tape backup of your HP SureStore
AutoBackup system.
User-initiated via detailed
message page
Troubleshooting, Alert Messages
file:///D|/ADMIN_~1/eng/trouble/alerts.htm (12 of 23) [5/3/2000 3:34:44 PM]