HP SureStore AutoBackup Administrator's Guide - Not Orderable

Use the tape backup cartridge to restore the client account information,

application configuration settings, software and data. This will also restore the

original appliance's network settings and name. See Appliance Recovery from

Tape for step-by-step instructions.

If you do not have not a tape backup

Replace the faulty unit.1.

On a PC attached to the same network segment as the appliance, insert the

Installation CD-ROM and run install.exe to initialize the appliance and

reset the administrator's logon. (Do not use the Installation CD-ROM in the

appliance CD-ROM drive.) Always set up the appliance with the same name.

The IP address may be different, if required. However, if you have protected

computers networked via routers, you must set the same IP address as the

original appliance, otherwise all protected computers will have to reinstall the

HP SureStore AutoBackup Agent (using the Reinstall from existing account

option).

All users will automatically be prompted to reregister with the appliance. This

recreates the user accounts and the appliance will automatically carry out a

baseline backup at the next backup. Earlier versions of files backed up to the

appliance before the failure will be lost.

Recovery From Hardware Failures

file:///D|/ADMIN_~1/eng/admin/failure.htm (3 of 3) [5/3/2000 3:32:17 PM]