HP Surestore Bridge FC 2/1 LV and FC 4/1 HV Installation and Operations Guide

Chapter 5 Management Interfaces 109
Chapter 5
4. Access menu options in the same way used for the serial interface.
5. To exit the Telnet session, select the
[Disconnect] option from your
Telnet client utility. In most Telnet utilities, this option is available as a menu
item.
Web Management Interface
The FC 2/1 LV and FC 4/1 HV allows any standard Internet Web browser to
view and change the FC 2/1 LV and FC 4/1 HV's configuration. Information
is dynamically generated in an HTML format by the FC 2/1 LV and FC 4/1 HV
so that Web browsers can access it.
To access the Web interface, enter the IP address of the FC 2/1 LV and FC 4/
1 HV into the Address field of a Web browser. Or, you can enter a URL using
a host name defined by the user - for instance, http://FC 2/1 LV and FC 4/1
HV. But, the user must define the host name on the DNS server first.
To make changes to settings, use standard keyboard and mouse controls to
input information and then select the
[Submit] button to send the changes to
the FC 2/1 LV and FC 4/1 HV.
A user name and password are required before any changes can be
submitted. The default user name is
[root] and the default password is
[password]. It is recommended that you change the user name and
password as soon as possible. See Ethernet Connection on page 64 for more
information on setting up user names and passwords.
Changes will not take effect until the next time the FC 2/1 LV and FC 4/1 HV
reboots, but the unit can be forced to reboot by selecting the
[Reboot] option
from the Diagnostics menu.
Note Resetting a bridge to factory defaults will render the bridge
unable to use a gateway until the IP address and gateway are
re-configured via the serial interface. This will result in a loss of
connectivity during an http session.
In-Band Management
The FC 2/1 LV and FC 4/1 HV supports a set of SCSI-3 commands that can
be received as FCP commands over the Fibre Channel bus or as SCSI
commands over a SCSI bus. These commands provide support for value added
features such as Copy Manager and In-Band Management. When using these