1 HV Installation and Operations Guide

Chapter Overview 129

HTTP Interface

Chapter Overview

This chapter describes the following:

■ Accessing the HTTP Interface on page 130

■ Making Changes via the HTTP Interface on page 131

■ Main Menu on page 133

The HTTP interface for the bridge allows access to many configuration settings

including:

■ Baud rate of the serial port

■ Fibre Channel address

■ SCSI Initiator and Target IDs

■ Ethernet IP and MAC addresses

■ Device Mappings

■ Trace level settings

All of the above settings and others may be changed and saved.

Note Unless otherwise indicated, configuration changes take effect when the

unit next powers on or reboots.

The HTTP interface allows any standard Web browser to view and change the

bridge’s current configuration and operating status. Information is presented in

HTML format in accordance with the W3C specification for HTML 3.2. Current

W3C Recommendations and other technical documents can be found at

http://www.w3.org/TR/.