1 HV Installation and Operations Guide

136 Main Menu Chapter 6

Main Menu > Configuration > Fibre Channel

This menu allows for setting the Fibre Channel Address method, Hard Address

value, discovery mode, WWN overrides and FC Port mode.

Figure 42 Fibre Channel Configuration Page

Note For In-Band Management to be operational, WWN naming schemes

MUST be compliant with IEEE Fibre Channel Format 1, where the left-

most hexadecimal character (the NAA field) of the WWN is '1'.

Further, the upper nibble of the third byte (the sixth hexadecimal value

from the right) must be a value of '0' or'1'.

■

World Wide Node Name High is normally not changed.

■ World Wide Node Name Low is normally not changed.