1 HV Installation and Operations Guide

16 Chapter Overview Chapter 1

Figures 1, 2 and 3 show typical FC-to-SCSI configurations. By using the

bridge, any host on the FC fabric can access the tape drive and library or

magneto-optical jukebox on each SCSI bus.

Figure 1 Typical Fibre Channel-to-SCSI Configuration Using the 2/1 LV

Figure 2 Typical Fibre Channel-to-SCSI Configuration Using the 4/1 HV

Figure 3 Typical Point-to-Point Fibre Channel-to-SCSI Configuration Using the 2/1 LV