HP Surestore Bridge FC 2/1 LV and FC 4/1 HV Installation and Operations Guide
Chapter 6 Main Menu 143
Chapter 6
Select the [Edit Index Mode Map] button to switch to manual editing of the
map table.
Main Menu > Configuration > SCSI
This menu allows for setting the various SCSI attributes. Current settings are
displayed at the bottom of the screen.
Figure 47 SCSI Configuration Page
■ SCSI Bus Reset toggles the SCSI reset operation between No-Reset and
Reset-on-Boot. When set to Reset-on-Boot, the bridge will automatically
discover SCSI devices after initial power up and after reboots.
■ SCSI Bus Discovery Delay changes the discovery delay time for SCSI
devices. This is the time the bridge waits after a power-up or reboot before
starting to discover SCSI devices. This value should be set to no less than
250ms, according to the SCSI standard for Reset-to-Selection Time. HP