1 HV Installation and Operations Guide

144 Main Menu Chapter 6

recommends you set the value to at least 2 seconds to ensure all SCSI

devices complete their individual power-ups.

■ Initiator Mode Buffered Tape Writes enables/disables Buffered Tape

Writes which return status on consecutive write commands prior to the

tape device receiving data in order to enhance performance.

■ Target Mode Buffered Tape Writes enables/disables Buffered Tape Writes

which returns status on consecutive write commands prior to the tape

device receiving data in order to enhance performance.

Select the

[Submit] button to submit changes for any of the above settings.

To change the SCSI settings for a particular bus, select the

[Settings] button

for the appropriate bus number shown. When this option is selected, the

following screen appears.

Figure 48 SCSI Settings

■ Initiator ID sets the ID for the SCSI device that requests operations from

other SCSI devices known as targets. This should be a unique ID on the

bus. Default is 7.

■ Remove Target ID eliminates target IDs previously added.

■ Add Target ID adds an ID for a SCSI device that responds to operation

requests from the SCSI initiator.