1 HV Installation and Operations Guide

Chapter 6 Main Menu 149

Chapter 6

Main Menu > Configuration > Active Fabric

This menu allows for setting the various Active Fabric attributes, including

server-free backup options. Current settings are displayed at the bottom of the

screen.

Figure 52 Active Fabric Configuration Page

■ Server-Free Backup Mode toggles between Enabled and Disabled. When

enabled, server-free backup capability is enabled on the bridge so that it

can accept Extended Copy commands.

■ Number of Controller LUNs sets the number of controller LUNs reported

by the bridge. The number must be in the range of 0 to 4.

Note If Server-Free Backup Mode is enabled, FC Discovery must be enabled

to allow bridge access to FC Targets.

For information on controller LUNs or Extended Copy commands, see

Appendix B. Chapter 1 has general information on server-free backup.