HP Surestore Bridge FC 2/1 LV and FC 4/1 HV Installation and Operations Guide
154 Main Menu Chapter 6
■ InLnkDataSeqs is the number of Link Data frames received by this port.
■ OutLnkDataSeq is the number of Link Data frames transmitted by this port.
■ InP_BSYFrames is the number of P_BSY frames received by this port.
■ OutP_BSYFrms is the number of P_BSY frames transmitted by this port.
■ InF_BSYFrames is the number of F_BSY frames received by this port.
■ InP_RJTFrames is the number of P_RJT frames received by this port.
■ OutP_RJTFrame is the number of P_RJT frames transmitted by this port.
■ LinkDowns is the number of Link Down conditions detected.
■ InABTSs is the number of ABTS frames received.
■ OutABTSs is the number of ABTS frames transmitted.
■ LaserFaults is the number of laser faults detected.
■ SignalLosses is the number of times Loss of Signal was detected.
■ SyncLosses is the number of times Loss of Sync. was detected.
■ BadRxChars is the number of bad characters received.
■ LinkFailures is the number of Link Failure conditions.
■ BadCRCFrames is the number of frames received with a bad CRC.
■ ProtocolErrs is the number of protocol errors detected.
■ BadSCSIFrames is the number of BAD SCSI frames detected.
SCSI Statistics:
■ IOs are the total number of data transfer events.
■ Discons are the number of times that devices disconnect from the bus
(usually to preserve bus or system performance).
■ Aborts are the number of times that operations were terminated on a LUN
from this initiator.
■ BusReset is the number of times operations were terminated for all LUNs
on this bus.
Select the
[Clear SCSI Statistic] button to clear the SCSI statistics.