HP Surestore Bridge FC 2/1 LV and FC 4/1 HV Installation and Operations Guide

Chapter 7 Omniback Configuration 169
Chapter 7
2. From the Device & Media Management screen:
select
[Edit] > [Create] > [SCSI-II Library]
Configure the library and drives so all nodes on the SAN can share them:
— Configure a single tape library
— Control the robotic arm from a single server, such as the cell server
—Do not check the SCSI Reserve/Release box (see Figure 69)
Figure 69 Logical Device Editor - SCSI-II Library
3. Configure each tape drive for each host that will access it.
In this example with two tape drives and two hosts, four tape drives must
be configured.
4. Select a Library device in the Device & Media Management screen shown
in Figure 68 on page 168, then
[right click] and select [Create]
> [Drive]
. The Logical Device Editor - Drive screen shown in Figure 70
on page 170 appears.