1 HV Installation and Operations Guide

Appendix D Ethernet Configuration 239

Ethernet Configuration

This option allows for setting up all Ethernet network settings including IP

address, Subnet mask, IP gateway, Ethernet mode, physical address, and

hostname.

For descriptions of selections 1) through 8), refer to Chapter 5.

■ 10Mps Only

■ 100Mps (half duplex) Only

■ 100Mps (full duplex) Only

■ 10/100Mps (Auto-Neg.)

Select 9) to toggle the DHCP setting. When DHCP is enabled, this activates

Dynamic Host Configuration Protocol and allows the bridge to be assigned a

dynamic IP address from a DHCP server located on the Ethernet network used

by the bridge.

HP Surestore Bridge FC 4/1 HV

X.X XXXX

Ethernet Physical Address : 08:06:07:05:03:09

IP Address : 1.1.1.1

Subnet Mask : 255.255.255.0

Hostname :

IP Gateway : 0.0.0.0

Ethernet Mode : 10/100Mbps (Auto-Neg)

DHCP Configuration : Disabled

1) Change Ethernet Physical Address

2) Change IP Address

3) Change IP Subnet Mask

4) SNMP NOT SUPPORTED

5) Change Security Settings

6) Change IP Gateway

7) Change Hostname

8) Toggle Ethernet Mode

9) Toggle DHCP Configuration

X) Return to main menu