HP Surestore Bridge FC 2/1 LV and FC 4/1 HV Installation and Operations Guide

Appendix D Ethernet Configuration 241
Ethernet IP Address, Subnet Mask, and Gateway Address
Once DHCP is enabled, any “null” readings are acceptable for these 3 options
before reboot. Also, the Ethernet Configuration menu will not allow for
changing these 3 options (since they are automatically configured by DHCP).
As a result, the Ethernet Configuration menu will display without these options
listed. Here's an example of this “DHCP-enabled” menu, note how the
following options are not displayed: 2) Change IP Address, 3) Change IP
Subnet Mask, and 6) Change IP Gateway.
Ethernet Configuration Menu
Version X.X XXXX
Ethernet Physical Address : 08:06:07:05:03:09
IP Address : 192.168.100.93
Subnet Mask : 255.255.255.0
Hostname :
IP Gateway : 192.168.100.1
Ethernet Mode : 10/100Mbps (Auto-Neg)
DHCP Configuration : Enabled
1) Change Ethernet Physical Address
4) SNMP NOT SUPPORTED
5) Change Security Settings
7) Change Hostname
8) Toggle Ethernet Mode
9) Toggle DHCP Configuration
X) Return to main menu