1 HV Installation and Operations Guide

Chapter 1 Fibre Bridge Components and Supported Products 27

Chapter 1

Stick-on rubber feet 4 Rubber pads for the bottom of the Fibre

bridge. (Not required for rackmount

installation.)

Serial cable 1 10 foot DB-9 to DB-9 serial cable,

included for troubleshooting and

reconfiguration purposes only.

Ethernet crossover cable 1 Ethernet cable (For service personnel

use only between bridge and laptop

computer, not to be connected to an

Ethernet Hub).

For troubleshooting and configuration

purposes only.

Read-Me contents sheet 1 Box contents description.

Safety & Regulatory statement 1 Safety & Regulatory statement.

French statement 1 A French regulatory requirements

statement.

Localized power cord 1 30 inch power cord.

Table 4

Options

Option 001

■ 2.5 meter SCSI cable 2 cables provided with the 2/1 LV Bridge

4 cables provided with the 4/1 HV Bridge

Option 002

■ 1 power strip

■ 2.5 meter SCSI cable to connect the bridge to the robotics controller

■ Mounting hardware for the power strip

■ Installation and Operations Guide

Table 3

Supplied Components for the 4/1 HV

Item Qty Description