HP Surestore Bridge FC 2/1 LV and FC 4/1 HV Installation and Operations Guide

hp surestore bridge FC 2/1 LV and 4/1 HV In this manual 5
In this manual
Chapter 1 Introduction: Describes the
operation of the HP Surestore
Bridge FC 2/1 LV and the 4/1 HV,
as well as bridge components and
supported products.
Chapter 2 Overview: Provides an overview
of the configurations options.
Chapter 3 Installation: Describes how to
install the bridge, as well as power
distribution, connections and
configurations.
Chapter 4 Configuration: Describes how to
configure the HP Surestore Bridge
FC 2/1 LV and the 4/1 HV.
Chapter 5 Management: Describes the
management operations, system
utilities and statistics, diagnostics
and trace history.
Chapter 6 HTTP Interface: Describes the
configuration and management
operations using the HTTP
interface accessed in a Web
browser.
Chapter 7 SAN Environment: Describes the
configuration of the bridge for use
in a SAN environment with a
variety of operating systems and
backup software applications.
Chapter 8 Troubleshooting: Describes the
troubleshooting process, as well as
problem-solution scenarios.
Appendix A Serial & Ethernet Pin
Assignment:
Describes the pin
assignments for the Ethernet
connection.
Appendix B Controller LUN Commands
Describes the set of SCSI-3
commands received as FCP
commands over the Fibre Channel
bus or as SCSI commands over a
SCSI bus.
Appendix C Addressing, Structures and
Operation:
Describes SCC
addressing structure, address
method definitions, peripheral
device addressing and SCSI
initiators addressing Fibre
Channel targets.
Appendix D Enabling DHCP: Describes
setting up DHCP over bridge
interfaces; Serial and Telnet
interfaces, Ethernet configuration,
Ethernet IP address, subnet mask
and gateway addressing. Also
explained is the HTTP interface
and troubleshooting.
Appendix E Customer Service: Customer
service URL.