HP Surestore Bridge FC 2/1 LV and FC 4/1 HV Installation and Operations Guide

Chapter 3 Installing the HP Surestore Bridge 55
Chapter 3
How to Assemble the L-brackets to the Fibre Bridge
1. Facing the back of the bridge, position the first L-bracket with the mounting
tab toward the back of the rack and pointing away from the bridge, as
shown in Figure 18.
2. Insert the 6-32 screws through the second and fourth holes from the
mounting tab and tighten (see Figure 18).
3. Follow the same procedure for the second L-bracket.
Figure 18 Assembling L-brackets to the Fibre Bridge