1 HV Installation and Operations Guide

76 Powering on the System Chapter 4

Powering on the System

The bridge is configured for most Fibre Channel installations without

intervention. The basic configuration uses one bridge connected directly to a

Fibre Channel host bus adapter (HBA) within a host computer. In expanded

configurations, the bridge may be connected to either a Fibre Channel HBA or

a Fibre Channel switch or hub.

■ Before powering-on the bridge, make sure that each SCSI device is

powered-on and configured to communicate over SCSI.

■ The drives within the tape library or MO jukebox need to be online and

have valid SCSI IDs.

Figure 35 Back View of the FC 2/1 LV

Figure 36 Back View of the FC 4/1 HV