1 HV Installation and Operations Guide

86 Perform Configuration Chapter 4

Baud Rate

This menu changes the baud rate used on the serial port. Select 1) - 5) for the

appropriate baud rate setting. If you are using the autobaud feature, it may not

be necessary to set a baud rate. See Autobaud Feature on page 65 for more

information.

The asterisk (*) symbol indicates the current setting for the baud rate.

Fibre Channel

This menu allows for setting the Fibre Channel address method, hard address

value, discovery mode, WWN overrides and FC Port mode.

Baud Rate Configuration Menu

Version X.X XXXX

1) * 9600 2) 19200

3) 38400 4) 57600

5) 115200

X) Return to previous menu

Fibre Channel Configuration Menu

Version 3.06 2008e Link Down

12/05/2001 09:43:33

Current Fibre Channel Configuration:

World Wide Node_Name (High Low): 0x100000E0 02019E91

World Wide Port Name High: 0x100000E0

World Wide Port Name Low: 0x02219E91

Discovery Mode: Discovery OFF

N_Port Mode

1) Change World Wide Node_Name High

2) Change World Wide Node_Name Low

3) Toggle Discovery Mode

4) Toggle FC Port Modes

X) Return to previous menu