1 HV Installation and Operations Guide

92 Perform Configuration Chapter 4

Ethernet

This option allows for setting up all Ethernet network settings including IP

address, subnet mask, IP gateway, Ethernet mode, physical address, and host

name.

■ Select 1) to change the Ethernet physical address, or MAC address, of

the bridge. Ethernet physical addresses are always assigned to Ethernet

adapters by the manufacturers.

■ Select 2) to change the IP address of the bridge. The default for this

setting is 1.1.1.1.

■ Select 3) to change the IP subnet mask for the bridge. The default for

this setting is 255.255.255.0.

■ Select 4) SNMP not supported.

■ Select 5) to change security settings, including the user name and

password. User names and passwords should be unique and kept

confidential. Use a combination of letters and numbers when creating user

names and passwords.

■ Select 6) to change the IP gateway for the Ethernet network of the

bridge.

Ethernet Configuration Menu

Version X.X XXXX

Ethernet Physical Address

IP Address

Subnet Mask

Hostname

IP Gateway

Ethernet Mode

:08:06:07:05:03:09

:1.1.1.1.

:255:255:255.0

:0.0.0.0

:10/100 MBps (Auto-Neg)

1) Change Ethernet Physical Address

2) Change IP Address

3) Change IP Subnet Mask

4) SNMP NOT SUPPORTED

5) Change Security Settings

6) Change IP Gateway

7) Change Hostname

8) Toggle Ethernet Mode

9) Toggle DHCP Configurations

X) Return to previous menu