HP Surestore Bridge FC 2/1 LV and FC 4/1 HV Installation and Operations Guide

Chapter 4 Perform Configuration 99
Chapter 4
SCSI-to-Fibre Channel Mapping
The SCSI to Fibre Channel operating mode is not supported for use within a
tape library or MO jukebox. You will not need to change or use this setting
under the menu item.
Utility Settings
This option allows selecting Trace or Event settings.
■ Select 1) to access the Trace Settings menu.
■ Select 2) to access the Event Settings menu.
Trace Settings
This option allows trace levels to be set. This should not be modified in normal
operation, as performance degradation may result.
Utility Settings
Version X.X XXXX
1) Trace Settings Configuration
2) Event Settings Configuration
X) Return to previous menu
Trace Settings
Version 3.06 2008e Link Down
2/05/2001 09:51:04
Level O: ON
Level 2: ON
Level 4: ON
Level 6: ON
Level 8: OFF
Level A: OFF
Level C: OFF
Level E and Level F are
reserved for engineering
debug.
Level E: OFF
Level 1: ON
Level 3: ON
Level 5: ON
Level 7: ON
Level 9: OFF
Level B: OFF
Level D: OFF
Level F: OFF
U) Update Current Operating Trace Levels
X) Return to previous menu
Enter trace level to change >