SAN Solution Installation Guide

Installation
HP-UX
 Fibre Channel Software Drivers
Chapter 22-38
4. Install the following FC Mass Storage drivers:
fcT1_fcp
fcT1_cntl
fcT1
fcp
fcpmux (if an FC-SCSI Mux is being installed)
td (if a Tachyon TL (A5158A) adapter is being installed)
5. Under the
Actions menu, select [Process New Kernel].
Installing on HP-UX Version 10.20
Follow the steps below to load HP FC Mass Storage/9000 software using
the HP-UX
 swinstall program.
1. Log in as root.
2. Insert the software medium into the appropriate drive.
3. If the software medium is a CD-ROM, mount the CD-ROM using the
command:
>mount dev/dsk/<cd_rom_dev_file>/tmp_mnt<
4. Run the swinstall program. Enter the command:
>usr/sbin/swinstall<
This opens the Software Selection window and Specify Source window.
5. Change the
Source Host Name if necessary. Enter the mount point of
the drive in the
Source Depot path field and select the [OK] button to
return to the Software Selection window. Select the
[Help] button to
get more information.
The Software Selection window will contain a list of available
software to install.
6. Highlight the correct version of FC/9000 software for your system
type.
Select part number
[J3630BA] for the FC Mass Storage software.
7. Select
[Mark for Install] from the Actions menu to choose the product to
be installed.