958-000289-001, June 2003)

Installing and Configuring the Director 2/64

81Director 2/64 Installation Guide

Verify Communication Between the Director and HAFM Server

Follow these steps to check director-to-server communication:

1. From the Products View page (as shown in Figure 37), take note of the shape

and color of the symbol behind the director icon. Table 5 explains these

symbols.

Figure 37: Products View page

Table 5: Director Operational States and Symbols

Operational State Symbol

Operational—Director-to-server communication has been

established, the director is operational, and no failures are

indicated.

Degraded—Director-to-server communication has been

established, but the director is operating in degraded mode and

requires service. This condition is typical if a port or redundant

FRU fails. Go to step 2.