fw 05.01.00 and sw 07.01.00 - Universal Port Module Kit - Installation Instructions

Installation Instructions
19Universal Port Module Kit Installation Instructions
The filler blank is secured to the director chassis with two captive Allen screws.
Both screws are spring-loaded to lock the filler blank in place.
3. Insert the torque tool into each locking Allen screw, as shown in Figure 4 for
the Director 2/64 and Figure 5 for the Director 2/140. Turn each screw
counter-clockwise until the spring releases and the tool turns freely.
Figure 4: Director 2/64 UPM filler blank removal
1 UPM Filler Blank 2 Torque Tool