fw 05.01.00 and sw 07.01.00 - Universal Port Module Kit - Installation Instructions

Installation Instructions
22 Universal Port Module Kit Installation Instructions
Figure 7: Director 2/140 UPM card installation
2. Remove the UPM card from its protective anti-static bag.
3. Hold the card by its stiffener and insert it in the chassis card track, as shown in
Figure 6 for the Director 2/64 and Figure 7 for the Director 2/140. The yellow
locking Allen screw should be at the bottom for the Director 2/64, and it
should align with the yellow “lock” symbols on the frame for the
Director 2/140. Verify the card is aligned in the card tracks, then slide it
forward until it makes contact with the backplane.
4. Secure the UPM card as follows: