HP Surestore Director FC-64 Command Line Interface User's Guide

Appendix 105
Appendix
Error 83: Not Legacy Mode Zone member cannot be put into the default zone in open mode.
For example, if the following series of commands is entered,
Error 83 results:
Root> maint system setOnlineState false
Root> config switch interopMode open
Root> config zoning setDefZoneState true
Configure the interoperability mode as
mcdata in the previous
series of commands.
Error 84: Invalid Port PDCM
Error 85: Invalid Code Page
Error 86: Invalid Code Set
Error 87: Invalid GCSGID
Error 88: Invalid Feature Key
Length
Error 89: Operational Mode
S390
Error 90: Invalid Port Type
Error 91: E_Port Type
Configured
Error 92: Port Unblocked
Error 93: S390MS Enabled
Error 94: Invalid Feature
Combination
Error 95: Invalid Switch
Operating Mode
Error 96: Invalid Chassis Serial
Number
Error 97: Invalid E_Port
Capability
Error 98: Chassis Serial
Number Is Zero
Message Cause/Solution