HP Surestore Director FC-64 Command Line Interface User's Guide

Glossary 113
Glossary
community profile
Info rmation that specifies which management objects are available to what
management do main o r SNMP c o mmunity name.
configuration data
Co nfiguration data includes: identification data, port c onfiguration data, o perating
parameters, SNMP c o nfiguration, and zoning c o nfiguration. A c onfiguratio n bac kup file
is required to restore configuration data if the CTP card in a nonredundant FC-64 is
removed and replaced.
connectionless
Nondedicated link. Typically used to describe a link between nodes which allows the
switch to forward Class 2 or Class 3 frames as resources (ports) allow. Contrast this to
the dedicated bandwidth that is required in a Class 1 Fibre Channel Servic e point-to-
point link.
connector
See optical fiber connector.
control processor card
Circuit card that co ntains the directo r mic ropro c essor. The CTP c ard also initializes
hardware co mpo nents of the system after po wer-on. A 10 Mbps RJ-45 twisted pair
co nnecto r is lo c ated on the CTP c ard to c o nnec t to the Ethernet LAN and co mmunic ate
with the HP EFC Server or a specific management station.
control unit
A hardware unit that controls the reading, writing, or displaying of data at one o r mo re
input/output units.
CRC
See cyclic redundancy check.
CTP
See control processor card.