HP Surestore Director FC-64 Command Line Interface User's Guide

config 23
CLI Commands
Output
The LAN configuration data is displayed as a table that includes the following properties.
Output Example
The output from the config.ip.show command displays as follows.
IP Address: 10.0.0.0
Gateway Address: 0.0.0.0
Subnet Mask: 255.0.0.0
config.port.blocked
Syntax
blocked portNumber blockedState
Purpose
This command sets the bloc ked state fo r a po rt.
Parameters
This command has two required parameters.
IP Address The IP address.
Gateway Address The gateway address.
Subnet Mask The subnet mask.
portNumber Specifies the port number. Valid values are:
0–63 for the FC-64
blockedState
Specifies the blocked state for the port. Valid values are
true and false.
Boolean 1 and 0 may be substituted as values.