HP Surestore Director FC-64 Command Line Interface User's Guide

26 config
Parameters
This command has two required parameters.
Command Ex ample
Root >
config port type 4 fport
config.port.show
Syntax
show portNumber
Purpose
This c ommand displays the port c o nfiguration fo r a single port.
Description
This show command, on the config.port branch, displays the current configuration for the
specified port.
Parameters
This command has one parameter.
portNumber Specifies the port number. Valid values are:
0–63 for the FC-64
portType
Specifies the type of the port. Valid values are
eport, fport, and gport.
portNumber Specifies the port number. Valid values are:
0–63 for the FC-64