HP Surestore Director FC-64 Command Line Interface User's Guide

38 config
config.switch
All of the config.switch commands, except for the config.switch.show command, require
that the switch first be set o ffline. ( Use the maint.system.setOnlineState to set the switc h
offline.) If these commands are entered while the switch is online, an error message
results.
config.switch.bbCredit
Syntax
bbCredit bbCreditValue
Purpose
This command sets the buffer-to-buffer credit value for all ports, except tho se ports
co nfigured for extended distanc e.
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter.
Command Ex ample
Root >
config switch bbCredit 2
bbCreditValue Specifies the new buffer-to-buffer credit value. This parameter must be an
integer in the range 1–60.