HP Surestore Director FC-64 Command Line Interface User's Guide

40 config
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter.
Command Ex ample
Root >
config switch interopMode open
config.switch.prefDomainId
Syntax
prefDomainId domainId
Purpose
This command sets the preferred domain ID for the switch.
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter.
interopMode
Specifies the interoperability mode. Valid values are
mcdata and open:
mcdata — McDATA Fabric 1.0
open — Open Fabric 1.0
domainId Specifies the new preferred domain ID value. This parameter must be an
integer in the range 1–31.