HP Surestore Director FC-64 Command Line Interface User's Guide

config 45
CLI Commands
Output Example
The output from the config.switch.show command displays as follows.
BB Credit: 2
R_A_TOV: 20
E_D_TOV: 4
Preferred Domain Id: 1
Switch Priority: Principal
Rerouting Delay: Enabled
Interop Mode: Open Fabric 1.0
config.system.contact
Syntax
contact “systemContact”
Purpose
This command sets the system co ntact attribute.
Parameters
This command has one parameter.
Command Ex ample
Root >
config system contact “Joe”
Rerouting Delay The rerouting delay that ensures that frames are delivered in order through
the fabric to their destination. Values are Enabled or Disabled.
Interop Mode Interoperability mode for the switch.
systemContact Specifies the new system contact string for the director or switch. The contact
can contain 0–255 characters.