HP Surestore Director FC-64 Command Line Interface User's Guide

48 config
Parameters
This command has one parameter.
Command Ex ample
Root >
config system location “Everywhere”
config.system.name
Syntax
name “systemName”
Purpose
This command sets the system name attribute.
Parameters
This co mmand has o ne required parameter.
Command Ex ample
Root >
config system name “Joe’s Switch”
config.system.show
Syntax
show
systemLocation Specifies the new system location for the director or switch. The location can
contain 0–255 characters.
systemName Specifies the new system name for the director or switch. The name can
contain 0–24 characters.