HP Surestore Director FC-64 Command Line Interface User's Guide

54 config
config.zoning.addZone
Syntax
addZone “zoneName”
Purpose
This command adds a new (empty) zone to the zone set in the wo rk area.
Description
Changes are not activated on the switc h until the co nfig.zo ning.activateZoneSet command
is issued. The CLI supports the number of zones per zone set specified for a given product.
Parameters
This command has one parameter.
Command Ex ample
Root >
config zoning addZone TheUltimateZone
config.zoning.deleteZone
Syntax
deleteZone “zoneName”
Purpose
This command deletes a zo ne from the zone set in the wo rk area.
zoneName Specifies the name of the new zone. The zoneName must contain 1–64
characters. Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz012345
6789$-^_
Spaces are not permitted, and the first character must be alphabetical.