HP Surestore Director FC-64 Command Line Interface User's Guide

config 55
CLI Commands
Description
Changes are not activated on the switch until the config.zoning.ac tiveZo neSet command is
issued.
Parameters
This command has one parameter.
Command Ex ample
Root >
config zoning deleteZone TheLeastUltimateZone
config.zoning.renameZoneSet
Syntax
renameZoneSet “zoneSetName”
Purpose
This command changes the name of the zone set in the wo rk area.
Description
Changes are not activated on the switc h until the co nfig.zo ning.activateZoneSet command
is issued.
Parameters
This command has one parameter.
zoneName Specifies the name of the zone to be deleted.
zoneSetName Specifies the new name for the zone set. The zoneSetName must contain
1-64 characters. Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz012345
6789$-^_
Spaces are not permitted, and the first character must be alphabetical.