HP Surestore Director FC-64 Command Line Interface User's Guide

60 config
Command Ex ample
Root >
config zoning deletePortMem TheUltimateZone 10 5
config.zoning.renameZone
Syntax
renameZone “oldZoneName” “newZoneName”
Purpose
This co mmand renames a zo ne in the work area.
Parameters
This command has two parameters.
Command Ex ample
Root >
config zoning renameZone TheOldUltimateZone TheUltimateZone
config.zoning.showPending
Syntax
showPending
Purpose
This c o mmand shows the zoning configuration in the work area o f the zone set that has no t
yet been activated.
oldZoneName Specifies the current zone name of the zone to be renamed.
newZoneName Specifies the new zone name.