HP Surestore Director FC-64 Command Line Interface User's Guide

maint 65
CLI Commands
maint . port . reset
Syntax
reset portNumber
Purpose
This command resets an individual port.
Description
This command resets an individual port without affecting any other ports. However, if a
device is attac hed to the po rt and the device is online, the reset causes a link reset to oc c ur.
If the port is in a failed state (that is, after failing a loopbac k test), the reset restores the
port to an operational state. The reset also clears all statistics counters and disables port
beaconing for the specified port.
Parameters
This command has one parameter.
Command Ex ample
Root >
maint port reset 4
maint.system.beacon
Syntax
beacon beaconState
Purpose
This command enables or disables unit beaco ning.
portNumber Specifies the port number to be reset. Valid values are:
0–63 for the FC-64