HP Surestore Director FC-64 Command Line Interface User's Guide

perf 75
CLI Commands
perf.link
Syntax
link
Purpose
This command displays port link counters for all ports.
Parameters
This command has no parameters.
Command Ex ample
Root >
perf link
Output
The port link counter data is displayed as a table that includes the following properties.
Port The port number.
OLS In The number of offline sequences initiated by the attached N_Port.
OLS Out The number of offline sequences initiated by this director or switch port.
Reset In The number of link resets initiated by the attached N_Port.
Reset Out The number of link resets initiated by this director or switch.
Link Flrs The number of times the port has detected a link error resulting from an
invalid link state transition or timeout.
Sync Losses The number of times the port has detected a loss of synchronization timeout
while not in an offline or LF2 state.
Sig Losses The number of times the port has detected a loss of signal while not in an
offline or LF2 state.