HP Surestore Director FC-64 Command Line Interface User's Guide

78 show
show
The show branch of the CLI command tree contains commands that display, but do not
change, sto red data values. No te that the displayed output that results fro m these
co mmands is not identic al with the o utput from the show c o mmands that are within the
other CLI command tree branches, for example, config.port.show.
The commands in the show branch can by used by either the Administrator or the
Operato r.
show.eventLog
Syntax
eventLog
Purpose
This command sho ws the c o ntents of the event lo g as maintained in NV-RAM on the
director or switch.
Parameters
This command has no parameters.
Command Ex ample
Root >
show eventLog