User's Guide

252$SSHQGL[
8
The link to the director is not
available.
The link from the HP EFC Server to the director is not available.
Check Ethernet connection.
The maximum number of
address configurations has
been reached.
The maximum number of saved address configurations has
been reached. Delete configurations no longer needed to allow
new configuration to be saved.
The optical transceiver is not
installed.
No information available for a port that is not installed. Ensure
the optical transceiver is installed and fully seated.
The director did not accept the
request.
The director was not able to perform the requested action. Retry
the operation. If the condition persists, contact support
personnel.
The director did not respond in
the time allowed.
Director timed out while performing the last action. Retry the
operation. If the condition persists, contact support personnel.
The director is busy saving
maintenance information.
Director is busy with a maintenance operation. Retry the
operation later. If the condition persists, contact support
personnel.
The director must be offline to
configure.
A configuration changed was attempted for a configuration
requiring offline changes. Take the appropriate actions to set the
director offline before attempting the configuration change.
This feature has not been
installed. Please contact your
sales representative.
Indicator that the feature has not been installed on this director.
Contact the your sales representative to obtain the desired
feature.
Message Cause/Solution
Unable to save data collection
file to destination.
Could not save data collection file to the specified drive (hard
drive, network). Retry the operation. If the condition persists,
contact support personnel.
Message Cause/Solution