Distributed Fabrics User's Guide

Using Remote Switch 19
Accessing Through the Telnet Interface
You can use the Telnet command
configure
to accomplish the following:
• Set the R_A_TOV and E_D_TOV values.
• Set the data field size.
• Set the Class F frame suppression flag.
You must disable the switch prior to entering the
configure
command.
Example:
switch:admin> configure
Configure. . .
Fabric parameters (yes, y, no, n): [no] yes
Domain: (1. .239) [2]
BB credit: (1. .16) [16]
R_A_TOV: (4000. .120000) [10000]
E_D_TOV: (1000. .5000) [2000]5000
Data field size: (256. .2112) [2112] 2048
Non-SCSI Tachyon Mode: (0. .1) [0]
Disable Device Probing: (0. .1) [0]
Suppress Class F Traffic: (0. .1) [0] 1
In this example, the default value is accepted for R_A_TOV.