Fabric OS Reference Manual

100 Fabric OS Reference Manual
lsrRtxTID
LSR retransmission timer ID.
inactTo
Inactivity time-out value, in milliseconds. When
this time-out expires, the adjacency with the
neighbor switch is broken and new paths are
computed to all possible destination switches in
the fabric.
helloTo
Hello time-out value, in milliseconds. When this
time-out expires, a Hello frame is sent to the
neighbor switch through this port.
rXmitTo
Retransmission time-out value, in milliseconds. It
is used to transmit topology information to the
neighbor switch. If no acknowledgment is
received within
rXmitTo
, frame is retransmitted.
nCmdAcc
Total number of commands accepted from the
neighbor switch. Number includes Hellos, Link
State Updates (LSU), and Link State
Acknowledgements.
nInvCmd
Number of invalid commands received from the
neighbor switch. Usually commands with an
FSPF version number higher than the one running
on the local switch.
nHloIn
Number of Hello frames received from the
neighbor switch.
nInvHlo
Number of invalid Hello frames (Hello frames
with invalid parameters) received from the
neighbor switch.
nLsuIn
Number of LSUs received from the neighbor
switch.
nLsaIn
Number of LSAs received from the neighbor
switch.
attHloOut
Number of attempted transmissions of Hello
frames to the neighbor switch.
nHloOut
Number of Hello frames transmitted to the
neighbor switch.