Fabric OS Reference Manual

136 Fabric OS Reference Manual
nbrStateShow
Display FSPF neighbor’s state.
Synopsis
nbrStateShow [portnumber]
Availability
All users
Description
Use this command to display information about neighbors to the local
switch, or information about a specific neighbor if a port number is
supplied. A neighbor is a switch that is directly attached to the local switch.
The display shows the fields in the following table.
Operands
This command has the following operand:
portnumber
Specify the port on the local switch that connects to the
neighbor being displayed.
Table 10. nbrStateShow display fields
Field Description
Local Domain ID: Domain number of local switch.
Local Port: E_Port (interface) on local switch.
Domain: Domain number of remote switch.
Remote Port: E_Port (interface) on remote switch.
State: State of the neighbor. The
E_Port
is used to route
frames only if the neighbor is in
NB_ST_FULL
state.