Fabric OS Reference Manual

Telnet Commands 165
args The command arguments – description depends on event type:
star
start type:
0
= enable ports,
100
= disable ports
disable
state (see
state
codes)
enable
mode:
0
= normal, non-zero = loopback
ioctl
I/O control arguments
Tx
&
Rx
first two header words and first payload word
reject
FC-PH reject reason
busy
FC-PH busy reason
ctin
Argument 0 is divided into two 16-bit fields:
[A] bit map indicating validity of subsequent args
(
0001
= argument 1 is valid,
0003
= arguments 1 and 2 are valid)
[B] ct-based service command code
Argument 1 = first word of the CT payload, if
applicable (as specified in [A])
Argument 2 = second word of the CT payload,
if applicable (as specified in [A])
ctout
Argument 0 is divided into two 16-bit fields:
[A] bit map indicating validity of subsequent args
(
0001
= argument 1 is valid,
0003
= arguments 1 and 2 are valid)
[B] CT command code indicating an accept (
8002
)
or a reject (
8001
)
If [B] is an accept, arguments 1 and 2 represent
the first and second words of the CT payload, if
applicable (as specified in [A]).
If [B] is a reject, argument 1 contains the CT
reject reason and explanation code.
errlog
error type (see
errShow
) create - name of the task
being created
Table 11. PortLogShow fields (continued)
Field Description